New products
Art. Nr: 51018
Writeable magnetic surface DIN A4 self-adhesive
Flexible adhesive film for magnets of all kinds as a whiteboard: Turn smooth surfaces into a multifunctional information board! The adhesive surface on the back is reusable and can be removed and reattached in a new location. The white-coated front can be written on with water-soluble felt-tip pens.
-
From 1€12.21*
-
From 5€9.77*
-
From 10€7.30*
Art. Nr: 38151
Magnetic tool board 298x298mm
Do you need a large magnetic board to store tools reliably and visibly? This is where our brand new magnetic tool board comes into play! Thanks to its strong magnetic force, it can hold hammers, pliers and screwdrivers securely and keep your workplace tidy. Thanks to its magnetic back, it can be attached to any iron surface or alternatively screwed on.
-
From 1€19.69*
-
From 5€17.06*
-
From 20€14.33*
Art. Nr: 37697
Flat bar with neodymium core 76x31,7x9,6mm in U-profile
Flat bars are a good alternative to standard pot magnets if you have long, narrow installation spaces. The neodymium magnet is protected in the U-profile and can be mounted quickly and easily through the side holes.
-
From 1€7.12*
-
From 20€6.15*
-
From 50€5.76*
-
From 100€5.50*
Art. Nr: 35421
Rubberized magnet system Ø43x3mm with cylindrical countersink
Rubberized magnets are characterized by three properties: high holding force, gentle treatment of the surface and non-slip safety. Thanks to the central cylindrical countersink, the magnet can be quickly screwed on.
Holding force: 90 Newton (approx. 9 kg).
-
From 1€8.79*
-
From 20€7.89*
-
From 50€7.04*
-
From 100€6.20*
-
From 500€4.76*
Special offers
Art. Nr: 35427.W
Rubberized magnet system Ø43x6mm with conical countersink
All-round rubberized magnet system with a magnetic core made of neodymium and conical countersink for screwing on. The rubber coating prevents the magnet from slipping and scratching smooth surfaces. Very strong holding power of 100 newtons (approx. 10 kg).
-
From 1€8.47*
-
From 20€7.61*
-
From 50€6.77*
-
From 100€5.90*
%
Art. Nr: 30205
Set of 24 colored cylindrical office magnets
Cylindrical office magnets in a practical set for office, school, warehouse or public facilities. Strong magnetic core made of neodymium can hold several A4 sheets at once. Available in red, blue and orange.
%
Art. Nr: 31027.1
Ferrite disc magnet Ø20x4.5mm magnetic on both sides
Ferrite magnets are very corrosion-resistant and can even handle weak acids, solvents or oils well. This opens up a wider range of applications and sets them apart from neodymium magnets. This ferrite disc magnet Ø20x4.5mm is anisotropic, axially magnetized and magnetic on both sides.
Art. Nr: 35805
Ferrite flat bar in galvanized U-profile 609.6x43.7x15.75mm
Flat bars in a U-profile are an alternative to round pot magnets when you only have a narrow mounting surface available. The screw head disappears into the rail profile during installation and does not put any load on the magnet core.
Holding force: 800 Newton (approx. 80 kg).
-
From 1€12.67*
-
From 20€11.70*
-
From 50€10.23*
-
From 100€8.54*
Art. Nr: 38197
Magnetic safety gripper for punching machines
The hands of your employees at the punching machine must not be exposed to any risk of injury. Our safety grippers are designed to place steel parts on the punching table without risk. After punching, the parts can be picked up again with the magnetic gripper.
-
From 1€4.20*
-
From 5€4.20*
-
From 25€4.20*
-
From 100€4.20*