Skip to main content

Art. Nr: 38215

Product features

  • The ideal choice when very high holding and shear forces are required and the surface must not be altered by drilling.
  • A good alternative to anchors and screws for the temporary attachment of very heavy weights.
  • Magnet system based on neodymium magnet blocks with an holding force of 2000N.
  • Rubber-coated on all sides, therefore the shear force of more than 90% of the adhesive force.
  • Central threaded pin M10x26 for load attachment.

Description

Length (mm): 125
Width (mm): 61
Height (mm): 28
Thread size M: M10
Thread length L (mm): 26
Holding force (N): 2000
Magnet material: neodymium
Design: with threaded pin
Housing material: rubber
Color: blue
Temperature resistance (°C): 80
Weight (kg): 1.06

Areas of application

The rubberized magnet system with the dimensions 125x61x28mm and threaded pin M10x26 is characterized by an impressive holding force of 200 kg. Due to the rubber coating on all sides, the magnet has a soft landing and is gentle on the surface. At the same time, the increased friction increases the shear force. These properties make it ideal for use in safety-critical areas:

  • Wind turbines: In wind turbines, statics are crucial, which is why drilling into the inner walls must be avoided. Our rubberized magnet system offers the perfect solution for this: Thanks to the threaded pin, it can be reliably connected to safety ladders and other components. These can then be magnetically attached to the inner wall of the wind turbine – without affecting the structure by drilling.
  • Safety equipment: Similar to wind turbines, rubberized magnet systems can be used to temporarily attach safety-related components. Whether ladders, solid covers or heavy objects, the high adhesive and shear force of this fully rubberized magnet guarantees a reliable hold.

Further sizes

Gummierter Magnet 100x61x28mm mit Gewindezapfen M10
Art. Nr: 38216
Rubberized magnetic system 100x61x28mm with threaded pin
This magnet system is incredibly strong with an holding force of 100 kg and rubberized all around, so your surfaces and the system itself are protected and slipping is prevented. Please note our included safety instructions!
  • From 1
    €78.32
  • From 5
    €71.96
  • From 10
    €64.02
Total:
Gummierter Magnet 200x61x28mm mit Gewindezapfen M10
Art. Nr: 38214
Rubberized magnetic system 200x61x28mm with threaded pin
This magnet system is incredibly strong with an holding force of 450 kg and rubberized all around, so your surfaces and the system itself are protected and slipping is prevented. Please note our included safety instructions!
  • From 1
    €107.38
  • From 5
    €101.02
  • From 10
    €92.93
Total: